All Products

D800 Large Diameter Sea Piling Spun Pile Mould

D800 Large Diameter Sea Piling Spun Pile Mould The Large diameter Spun Pile usually be used in Sea site, like harbor, jetty etc. piling project. Haiheng is the only company who can produce the large diameter spun pile mould from dia.700-1500mm in...

Steel Pile Mould For Malaysia Spun Pile

Steel Pile Mould For Malaysia Spun Pile Malaysia is one of biggest spun pile mould market of us and it exported the spun pile to many other area like Myanmar, Cambodia, Middle East etc, Jiangsu Haiheng's steel spun pile mould had 80% market share in...

Tensioning Device For Spun Pile

Tensioning Device For Spun Pile Tension Device is tensioning Workpiece for Spun Pile, it only together work with tension machine, our company have 7parts and 5 parts for re-pretress pole and pile, including tension nut, tension rod, support plate,...

Pretensioning Prestressed Concrete Pile Moulds

Pretensioning Prestressed Concrete Pile Moulds Jiangsu Haiheng is the biggest Chinese Manufacturer of Spun Pile Mould, we produced the steel mould, it is mainly apply to Pile Factory to produce Concrete Spun Pile, including Centrifugal Reinforced...

Hanging Device For Concrete Spun Pile Mould

Hanging Device For Concrete Spun Pile Mould 1. This machine is used to hang upper and bottom mold. 2. Three different types of grippers: A. for grabbing upper mold; B. for grabbing upper and bottom mold; X. for grabbling upper mold, bottom mold and...

Precast Concrete Electric Pole Mould In Myanmar

Precast Concrete Electric Pole Mould In Myanmar Precast concrete pole mould for electric cement pole is position fixing is made by radial tongue-and groove and axial taper pin. Manufactured stage by stage and binded by bolts at last, the mould is...

SPC Concrete Pole Centrifugal Machine

SPC Concrete Pole Centrifugal Machine SPC concrete pole centrifugal spinning machine is the essential equipment to produce reinforced concrete poles and drainage pipes. It also applies to produce many kinds of reinforced concrete circular...

Tension Release Machine For Remove Tension Nut

Tension Release machine During concrete spun pile production, after steam curing processing, it's move to Tension release procedure,the tension release machine is a special equipment for the removal of tensioning nut in pile production.this machine...

Crane Auto-Gripper Rotating Hold Type

Auto-Gripper Rotating Hold Type The special-purpose Rotating Hold Type gripper is suitable for spinning and curing place of concrete spun pile production flow. The application scope of special-purpose clamp :φ300---φ600 standard spun pile mould...

Overhead Crane Auto-Gripper Hoop Type

Auto-Gripper The special-purpose gripper is suitable for spinning and curing place of spun pile production flow. The application scope of special-purpose clamp :φ300---φ600 standard spun pile mould ,Length 15m and below. This special-purpose gripper...

Concrete Pole Spinning Machine

Concrete Pole Spinning/Centrifugal Machine: Concrete Pole Spinning/Centrifugal Machine is mainly apply to produce High strength centrifugal technology Prestressed Reinforced concrete pole(SPC pole) by spinning formed. According to customer's...

Tension Jigs Of Prestressed Tension Machine

Tension Machine is a kind of feedthrough pre-tensioing. It is also called spun pile tension jack machine, pole tension machine, prestressed tension machine etc. It is the neccesary equipment to produce Pre-stressed concrete spun pile and prestressed...

Special Pile Mould Bamboo Joint Pile mould

Concrete Special Pile Mould-Bamboo Joint Pile Mould In order to meet different construction site requirement, according to customer's feedback and request. Haiheng has produced special pile mould, like rectangle Pile mould, U sheet Pile mould ,...

Prestressed Hollow Square Pile Mould

Hollow Square Pile Mould Prestressed Hollw Square pile mould which is used to produce the hollow square pile, this kind of Hollow square pile in the process of production, it use tension prestressed, reperfusion concrete and then use centrifugal...