Home> Industry Information> Reasons and Countermeasures for Unplanned Parking of R535 Spinning Machine

Reasons and Countermeasures for Unplanned Parking of R535 Spinning Machine

March 11, 2019

Reasons and Countermeasures for Unplanned Parking of R535 Spinning Machine Han Shufa, Zhang Yanhong, Guanzheng Xinxiang Chemical Fiber Co., Ltd., Xinxiang, Henan 453011, China) Reasons for the high number of unplanned parking during the year and the installation and maintenance of the sixth filament workshop The corresponding countermeasures adopted, that is, grasping the key processes of installation and maintenance of the spinning machine, and strengthening the construction of the workforce are the fundamental reasons for reducing the number of unplanned stops of the spinning machine within one year of commissioning.

1刖目 R535 spinning machine is currently the main type of viscose filament production enterprise in China. Our company has expanded the second filament workshop from 87 years until the expansion of the sixth filament workshop in 2000. The parts are supplied by many manufacturers and assembled by themselves, which makes the installation work more difficult. At the same time, the number of unscheduled stops of the spinning machine after driving is high. This requires us to have a skilled team of workers to disperse the spinning machine. Assembly and daily maintenance and maintenance ensure that the equipment runs normally and smoothly, and escorts production.

2 Reasons for Unplanned Parking of Spinning Machine The R535B spinning machine that our company installed, commissioned and drove before was put into operation within one year. The unplanned parking was mainly caused by the spindle breaking and rolling keys, followed by other reasons such as burning motor. of.

2.1 Spindle break When the cabinet is installed, the coaxiality adjustment of the spindle is not in place and the coaxiality of the spindle between the installation time zone and the zone of the spinning machine does not meet the installation standard. After the spinning machine is put into normal production, it has been subjected to the rotation of the spindle. The large torque causes the spindle to be twisted to cause the spinning machine to stop. Unplanned parking due to spindle breakage accounts for 60%. 2.2 When the roller key is installed, there is a deviation of the tightening torque of the coupling bolt, the tightening torque is not enough, or the key and the keyway have a large clearance. During normal production, the coupling is loose due to long-term rotation. The key is rolled out of the keyway to cause the spinning machine to stop. Unplanned parking caused by rolling keys accounted for 30*. 2.3 During the operation of the motor, the temperature rise too fast caused the motor plastic blade to deform and fall off, or the motor quality problems such as bearing oil shortage caused the motor to burn and cause the spinning machine to stop. Unplanned parking caused by burning motor accounted for 5*. 2.4 Other fasteners loose, high frequency heating of electric spindle, beating of the transmission part of the machine head, vibration or unsynchronization of the wire-wound beam, breakage of the belt of the machine head, etc. The silk machine is unplanned, but the probability is very small. These factors together only account for 5* of the unplanned parking, and generally do not cause the spinning machine to stop.

3 Countermeasures Analysis The reason why the R535 spinning machine has a high number of unplanned stops during one year of production is ultimately caused by the quality of the installation. Therefore, we focus on strengthening the construction and management of the installation team.

3.1 Develop a lifelong investigation system to uniformly number the installers. When the cabinets are assembled, the respective work numbers will be hit on the cabinet, the responsibility will be clearly defined, and the people will be implemented and the lifelong investigation system will be implemented. The formulation of this system fully mobilized the subjective initiative of the employees, and enabled the employees to actively and consciously do the installation work from the traditional concept of 'you want to do well', which is passively accepted for inspection.

3.2 Improve the accuracy of the spindle flat shaft For the spindle break, the accuracy of the flat shaft of the spindle should be accurate, so that the coaxiality accuracy can meet the installation requirements, thereby reducing the vibration of the box.

3.2.1 Strict box assembly quality, the coaxiality of the spindle during assembly <0.15mm see). After assembly, the box spindle can be rotated freely and flexibly.

Spindle single-zone assembly coaxiality 3.2.2 Spinning machine assembly accurate flat axis accuracy, the coaxiality between the zone and the zone <0.06mm. For the axle head, only the auxiliary support foot can be moved according to the need, but the main support can not be moved. Foot; the knife edge is inspected at the same time in the upper, middle and outer directions. If there is a direction that is unqualified, it should be repositioned; the bolts of the fixed box are tightened and then measured with the knife edge to ensure that the upper, middle and outer sides are installed. After the end, the installation requirements can still be reached.

3.2.5 Inspection The standard spinning machine is assembled and requires the spindle to be rotated without any aid.

3.3 Improve the uniformity of the rolling key. There is a deviation between the tightening torque of the coupling bolt and the tightening torque. We have equipped a special wrench to tighten the bolt diagonally and balance the force to ensure that the tightening torque of the diagonal bolt is uniform and the two gaps are uniform. . For the key and the keyway, the clearance is large, and the unqualified shaft and the coupling are replaced in time to achieve an interference fit.

3.4 Establish supervision and inspection system The technical personnel are responsible for acceptance, check, and unqualified installation quality, and require them to rework until they meet the installation requirements.

Coaxiality between the spindle area and the zone 3.2.3 After the box is in place, the accuracy of the spindle head is accurately calibrated, the coaxiality of the spindle shaft head is <0.04mm. Zone 1, the coaxiality of each spindle head of Zone 2 is 3.2.4 Installation When the spinning machine is in the upper box, the following points should be made: the box should be lightly placed to prevent the box legs from shifting; the tightening torque of the bracket bolts can meet the requirements; the first box requires a smooth connection with the head, and the vertical line distance To meet the requirements, the horizontal deviation positive and negative does not exceed two levels of the level; 3.5 enhanced motor overhaul 3.5.1 to the motor on the 114 spinning machine used to repair all the time in the past two months, cleaning, replacement of some bearings, fan pages, and Refueling.

3.5.2 The 114 spinning machines are divided into responsible machines according to the personnel. It is required to check their respective responsible machines first when they go to work every day. It is found that the motor heating or other abnormal conditions are reported in time and taken without affecting the normal production of the spinning machine. The corresponding measures are taken to ensure that the motor is running normally.

3.6 Strengthening the staff's operational skills training and learning is not regularly conducted. Employing experienced masters and technicians to train and lecture on equipment installation, maintenance technology and equipment theoretical knowledge, and regularly conduct theoretical tests on theoretical and practical operations. Multi-faceted comprehensive improvement of the operational skills of the maintenance workers and the comprehensive ability to deal with problems.

3.7 Convene the experience exchange meeting, strengthen the equipment maintenance quality, often hold the maintenance work experience exchange meeting, exchange their experiences in daily work, and sum up the 'four characters' for the daily maintenance of the spinning machine and the minor repair work. ", diligence" diagnosis method. That is to see, smell, listen, touch "and the current equipment is abnormally reported immediately, without affecting the normal production of the spinning machine, can make full use of the replacement of the nozzle car for some bearings, fan pages and other parts in a short period of time. Repair or replace it to ensure the normal operation of the equipment.

Look: Look at the equipment and look at it carefully. You can find the problem at a glance. For example, whether the fuel quantity meets the requirements, whether the wire-wound beam is vibrating, etc.

Smell: All kinds of odors caused by abnormal abrasion of leather parts such as belts and plastics can be found with a nose.

Listening: The gears in the head are not well meshed; the belt is broken, and the transmission parts are beating and other factors can cause the head to be noisy.

Touch: Touch the spindle, the box, etc. by hand to see if it is hot.

4 Conclusion By adopting the above measures, the installation quality and installation speed of the sixth filament workshop have created the most history of our company. The trial production was successful once, and the first batch of products reached the first-class product level on that day. 73%, creating a record of the largest scale, the shortest time, the most capital, and the best quality. Since the car has been running for more than a year, the number of unplanned stops has been much lower than that of the same type of spinning machine that our company installed, commissioned and drove in the past. This fully demonstrates that the key process of installing and maintaining the spinning machine is very good. A responsible workforce is fundamental to reducing unplanned parking.

Continued from page 22) The inherent characteristics of composite materials are increasingly used in the construction industry, including roof waterproofing materials, road construction materials, hydraulic engineering materials, and environmental engineering materials.

5.2 Land transportation to reduce weight and save energy has become a top priority for the automotive industry and railway transportation vehicles. It can be mainly used for automotive transmission brackets, door beams, automotive interior parts, noise absorbing panels, inflatable safety bags and tire cord fabrics. Wait.

5.3 Filter materials can be widely used in gas, liquid filtration in environmental protection, chemical, pharmaceutical, food and other industries, which can improve service life and reduce production costs. There are also special filter materials such as ultrafiltration and high temperature resistance.

5.4 For packaging materials and other aspects of packaging materials, low-grade composite membranes made of low-grade hemp textiles are used for general industrial packaging. Other aspects, such as the application of cable covering materials, battery separators, disk linings and some special functional fillers and components, have become an integral part of high-tech new materials.

Art has emerged, composite materials have received increasing attention, and the research and development of high-performance natural fiber composites has opened up new applications for composite materials. To develop and research such composite materials and their products, to make full use of natural resources, reduce environmental pollution, transform traditional agroforestry, increase their added value, and at the same time increase the industrial share of textiles in addition to clothing and decoration, thereby promoting traditional textiles. The high-tech transformation of industry has positive significance. Such composite products will have greater market potential and good development prospects. However, from the current point of view, the research of natural fiber composite materials is not deep enough and systematic, and it needs further research and research.


The above is the Reasons and Countermeasures for Unplanned Parking of R535 Spinning Machine we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> Reasons and Countermeasures for Unplanned Parking of R535 Spinning Machine

Copyright © 2024 Jiangsu Haiheng Buiding-Materials Machinery Co.,Ltd All rights reserved. Privacy Policy

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send